Already spending hundreds month-by-month on these rising electricity-bills? It seems like a simple Residential Solar Energy System can easily save you all that trouble. Many users already found out that this technique requires no more than a weekend to get it done. Follow this report in order to learn more and understand how it can help you.

Basic introduction

Thinking that making such Residential Solar Energy System is complicated? You should definitely check one of these popular guides that teach how to assemble Solar-Panels in just one weekend. It is important then to choose the right guide; make sure it offers clear instructions, video tutorials, diagrams, and technical support. This way or another, here are just a few advantage & advices that may help you to know more about this subject.

Important advantages

We could clearly notice several good reasons to use this one-of-a-kind solution:

* One-time investment that lasts for life.
* Very quick return on investment (ROI).
* Leaves us almost unaffected by any possible energy crisis.
* Knowing that we are doing our part to conserve the planet.
* Should you create more energy than needed; the power-company will actually pay you!

Tip

In order to optimize it, make sure to place the solar-paneling unit in a spot that gets the most sun at all times of the year.

Quick summary

Residential Solar Energy System finally enables any household to consume as much elect. as needed with no limits, and most importantly – at significantly lower cost. We could probably indicate many other great benefits provided by this special idea, simply because it is highly-effective. The first action you need to take is to test it and experience how it takes just days to start enjoying from its benefits.

If you are building your home you have several choices to choose from regarding your heating source. If you choose to heat from the sun you need to build your home facing in the direction that the sun rise’s. This allows your home to get the most sunshine during the hottest part of the day. Buying solar powered glass windows allow the sun to come through and stay in the home without escaping back out. After the sun goes down your home is kept warm by the sunlight that came into the home during the day. You need to keep the door shut in order to keep the heat in and you also need to use insulated curtains on the windows at night so that the heat will not escape at night while you sleep. Make sure you don’t allow too many windows on the side of the house that faces the evening sun as it may cause the home to cool down quickly.

Remodeling your home to use the sun as a natural heating source is fairly easy to do. Although you can’t change the direction that your home is built in to face the morning sun you can still trap the sunlight that shines through and reduce the amount of time that you use another source of heat. You may want to consider building a sun room onto the side that catches the morning sun allowing it to heat up naturally and then install ceiling fans that will circulate the air into the parts of the house. During the day this may provide enough heat to maintain the warmth in your home. When remodeling your home, it will help to install solar power windows that are specially designed to attract the sunlight and allow it to come into the house but not let it escape. This is a natural way to heat your home.

Using sunlight to heat your home is an excellent way to safe money on your heating bill and also to improve the environment. You can install a backup heating source incase the sunlight does not heat your home efficiently during the day because of clouds. Your back up system can be used to assist the solar energy which will also cut down on the use of electric or gas.

There are mainly various interconnected sophisticated components that are fragile by nature and a little bit of lacklustre behavior could takes it toll over the client who is ready to purchase the unit sooner or later. It’s the duty of a hired contractor to specify every sophisticated component of the solar product to the owner with descriptive analyses as to what could happen with the stipulated guarantee of product working for years and the cost of maintenance equires for timely over-hauling of the defined solar unit. With the helpof a contractor the component can be replaced easily as what it might take more time by the cutomer itself. The working procedures of the contractor could be learned broadly according to such terms mentioned: There are different varities and sections of solar unit system such as: A complete “Stand alone solar system” is economically excellent. The system is used primarily for RV systems; cabins; backup; lighting and for portable power systems. The Photovoltic array size (solar panel numbers) and battery will wholeheartedly depend upon individual power requirements. The solar panels charges up the battery during daylight hours and the battery thereby supplies power to the inverter for improved productivity of the unit. A contractor could recommend to have 2 inverters to supply for AC house current which might becoe necessary to power up large loads used upon for air-conditioners. The two could be demanded as one can wok while other has gone for servicing or repairing work. Certain clients hire contractors because they possess more knowledge and information about the fickle climatic conditions because a particular client might never know prolonged adverse affects of the fickel climatic conditions.

A contractor could also recommend for extra battery storage if in case the system doesn’t work in the first instance. The other basic but important components to be installed in a solar panel unit might consists of charging controllers; cells; arrays; inverters; wirings; etc. A solar panel unit contractor should be an expert to know upon the type of enewable energy source a client demands with years of practising up of installations of such units commercially. A contractor can also be asked about another specific manufacturing enterprise for such products or othe industrialized labors who are the experts working as a team for the contractor. The warranty and service policies are offered by competing bids.

Numerous of us are fascinated by the technology that is solar power – but hardly any of us realize exactly how it has the ability to hold all of the energy that the solar panels accumulate. All of the energy is from the sun – which is why you are not able to gather it during the evening hours when the sun is covered from us.

Because of this special devices had to be made that would be able to store it for numerous hours and with little troubles. There are thermal mass devices that can hold the electricity in the form of heat for ordinary temperatures or for particular seasons.

These systems are most commonly developed with things that have the ability to resist high heat. This includes earth, stone, and water. Some of the more special and well developed systems have the power to lower peak demand, lower the heating and cooling demands, and shift the time it is supposed to be utilised during the off peak hours.

The phase change materials are also utilised for thermal storage and are some of the most low-cost kinds. They are more general for residential homes where they are easier to get a hold of and to put in. These materials include Glauber’s salt and paraffin wax. The first Glauber’s salt solar power heating system was employed in 1948 in a house in Massachusetts.

Molten salts are utilized to hold solar energy at high temperatures. This is essential for storage medium and are more valuable because they are not as expensive and able to stand firm against some of the most severe heat temperatures. There are also off-grid PV systems that utilize rechargeable batteries to contain extra amounts of electricity.

Steps to building or remodelling your Home

Building your own home can have multiple choices regarding home heating source. Solar heating works much cheaper than electricity. In case your choice is solar heating then your home needs to be east facing i.e. in the direction of the rising sun. Thus your home gets the maximum sunshine during the hot period of the day. Fixing Solar Powered Glass Windows also helps to lock the warmth of sun that comes through in the home during the day without letting it escape thus keeping your home warm even after sunset.

Only condition is that the door should be kept closed in order to lock the heat and install insulated curtaining on the windows at night so that warmth remains in the room through out the night. Also ensure that there are not many windows on West side of the house because setting sun may cause the home to cool down quickly.

In case you wish to use the sun as a natural heating source then it is extremely simple to remodel your house. Even though your home is not facing the rising sun, it is quite easy to shut in the sunlight that comes in by building a sun room on the east side of your home to trap the morning sun light thus heating up the room naturally and then with the help of ceiling fans circulate the air into the other parts of the house.

During the day this will not only keep your warm but reduce the mount of time used on other source of heat. While remodeling the home installing solar power windows specially designed to attract the sunlight, will allow trapping it in without letting it to escape. Thus heating your home naturally.

Using solar energy to heat up your home naturally is not only the best way to reduce your energy bill but is environment friendly to because it gives off absolutely zero emissions. A backup heating arrangement can be installed incase the sunlight is not sufficient to heat effectively due to clouds. Thus reducing your electricity bill considerably.

The reality is that having a solar energy system installed in your home can be very expensive, to the tune of around $20,000. That said, the only way to do this cost-effectively is to build your own. On the surface, this might sound like an arduous undertaking, but luckily, many people that have gone before us and paved this path already. There are several, simple to follow DIY tutorials that you can take advantage of.

With today’s increasing awareness of global warming caused by the excessive burning of fossil fuels, more and more people are looking to reduce their “carbon footprint” and take more responsibility for the care of the Earth. If you want to be a part of today’s green revolution, then home solar power is a great option. It’s renewable, clean and doesn’t really require much upkeep after the initial installation. Installing your own system is not only great for the environment, but it will also provide you with a great back-up source of power in the case of outages in your area, and additionally save you money at the same time. Solar energy itself is free and endless. There is no reason why we shouldn’t take advantage of it in our own lives.

For a step-by-step guide to create your own home solar energy system, check out a great resource on the subject here.
http://homesolarpowersystem.blogspot.com

The utility companies announce such increase in prices in their bills, but one has to glance at these bills to know about the impending increase in costs. Unlike these people, there are another group of people who have value and respect for their hard earned money. They know that the power costs are getting out of hand and they search for alternatives like sourcing electricity through solar cells. Nature has gifted us with sunshine and it does not cost any money to access and use the same. The solar power cells convert the light energy emitted by the sun and turn it into electric power. The power can be directly fed into their electric gadgets or it can be stored in heavy-duty cells (like the ones used in automobiles) and use it as and when required.

Ask any person who has installed such solar cells, especially those who have assembled the same via kits available on the net and in stores that specialize in electric equipment, and they will tell you of the substantial savings they are benefiting. Those who are interested in installing a solar power rig in their home first have to calculate how much power they require from such cells. Once these formalities are over with, they can purchase a kit that will provide them with the requisite power. Installing such a kid is child’s play and a basic knowledge of soldering is more than enough. The kits generally contain of individual solar cell modules, an exhaustive and illustrated setup manual and an aluminum panel to hold the completed solar cell array.

These cells are connected to each other in series and the final output point goes directly into the equipment that needs power or to the battery. These kits are so cheap that they pay off for themselves within a few months post installation. The current generation photovoltaic cells convert about 30% of sunlight that falls on them to electrical energy, but scientists are working to make more efficient photovoltaic cells that will provide more power per exposed meter of solar cells. The prime advantage of using solar cells for a solar energy house is that they hardly require any maintenance. Just dusting the panels once every few days to ensure that sunlight falls on them properly is more than enough.

Thus, the subject of solar energy is one of the oldest subjects on Earth. It has gone through many evolutions and has been the subject of many schools of thought – starting with religion, and ending up in the field of science.

In fact, though not many people know this, a large portion of the western civilization celebrates the returning of the sun each year, just as the ancients did thousands of years ago.

I am, of course, referring to Christmas – which dates back to the celebrating of the winter solstice, the point in time when the Earth has reached its furthest point away from the sun, and starts returning.

Of course, the story of Christmas has radically changed from its original meaning. It has gone through its own evolution. Originally being a celebration of the sun’s return, it then became the celebration of the birth of Christ, and eventually wound up with a friendly old man bringing Coca Cola on Christmas Eve. But this last point is simply modern marketing at work.

The First Uses of Solar Energy

It is almost impossible to exactly date the first uses of solar energy.

But we do know that the ancient Greek and Roman civilizations, among others, made use of “passive solar energy” in their building designs.

Passive solar energy is the use of a building’s architecture to capture the sun’s heat and light.

In 200 B.C., the Greek scientist, Archimedes, used concentrated solar power technology, (now referred to as “CSP”) by combining the reflective properties of many polished bronze shields, in order to focus sunlight and thus set fire to an invading Roman fleet while it was besieging Syracuse.

(In 1973, The Greek Navy recreated this scenario as an experiment, and succeeded in setting fire to a wooden boat 50 meters away.)

Socrates and the Romans

Even the famous Greek philosopher Socrates has commented on the benefits of facing one’s house toward the south, in order to make use of the heat provided by the sun in the winter.

The Romans also used this technique, of facing their houses southward, but they took it a step further. They also installed more windows on the south side, allowing the heat and light of the sun to freely enter the buildings.

Throughout the first four centuries after Christ, Roman bath houses employed passive solar heating. The Romans built the bath houses with large, south-facing windows, to let the sun’s warmth in. This aspect of passive solar technology is still used by architects today.

With these methods, they were able to reduce the amount of fuel they needed to heat their buildings. And considering that you had to go out and chop your own wood in those days, it was well worth it.

Although naysayers, like fossil-fuel competitors, want us to think otherwise, I can easily demystify some common falsehoods about solar energy because progress and continued research proves that the current and future technologies of PV will meet our needs for cleaner power, which definitely is information worth discussing over any dinner party.

First of all most naysayers contend that solar energy cannot deliver any major portion of electricity to the states or the world for that matter. This is a falsehood based on the fact that PV technology can meet the required demand. That a 100-mile-square area of Nevada could supply solar energy to the states with all its electricity (roughly 800 gigawatts) operating reasonably efficient (10%) commercial PV modules.

Land, parking lots and rooftops are available for use to generate enough power. An estimated 17 by 17 miles per state is the required amount needed to produce 800 gigawatts. Apparently, there are enough “abandoned” sites that could be used for solar panels.

Supporters of solar electricity definitely have proven that PV can supply a major portion of the U.S. electrical needs with their projection of an increase of at least 15% of new added electricity capacity in 2020 with another increase of 10% by 2030.

Another falsehood I hear quite regularly is that photovoltaics will never become a huge industry. It’s a boutique business for a small group of privileged consumers.

Quite the contrary, solar electricity is a full-fledged business that has been growing steadily for more than 35% per year over the past 2 years. As a matter of fact, it’s been reported that the U.S.-based industry itself is reaching the $1 billion mark per year and providing 25,000 jobs. In the next two decades the growth rate is expected to rise to the $10-$15 billion level, thus provided 300,000 jobs by 2025. We are talking a major expansion of solar electricity as a tried and true power source.

Another very common falsehood that I hear at dinner party conversations is the PV is too expensive and will not ever compete against all mighty fossil-fuels – the industry will never manufacture the energy that it takes to produce the system.

Do I have a smirk on my face? Yes. This is so far from the truth, it is ridiculous. The overall cost of producing PV modules has dropped from 1980 at $50 per peak watt to as low as $3 per peak watt, presently, bringing the competitive applications to as low as 15¢-25¢ per kilowatt hour (kWh).

One can simply take a look at the market in California. The state incentives and net metering alone have places, PV electricity prices below 11¢/kWh, which is in the norm with some utility-delivered power. Designed for most domestic markets the trend is projected to continue through 2010 for most domestic markets.

Technologically the thin-film modules that are being implemented today payback in one year or even less, which means clean and practically free of overhead energy for the remaining 29-year life expectancy of the modules.